PTS125SM12-2 LFS

PTS125 Series 12 mm Tact Switches NEW Features/Benefits • THT and SMT terminations • Various heights • Snap fit actuator option Tactile Switches B Typical Applications • Consumer products • Instrumentation • Computer products • Industrial Specification Environmental FUNCTION: Momentary action CONTACT ARRANGEMENT: 1 make contact SPST, N.O. TERMINALS: PC pins for THT and G type for SMT TRAVEL: 130 gf 0.20 mm 180 gf 0.25 mm 250 gf 0.30 mm 350 gf 0.35 mm OPERATING TEMPERATURE: -40˚C to 85˚C Process SOLDERING: This component is suited to the following methods: Infrared reflow soldering in accordance with IEC 61760-1 for SMT version Wave soldering compatible with lead free soldering profile Mechanical Packaging Dimensions of reels according to EIA 481B. External diameter 330 mm. OPERATING FORCE: 130 gf, 180 gf, 250 gf, 350 gf Electrical MAX VOLTAGE: 12 VDC MAX CURRENT: 50 mA DIELECTRIC STRENGTH: 250 V AC (1mn) CONTACT RESISTANCE: 100M Ω BOUNCE TIME: < 5 ms NOTE: • Specifications listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. • The PTS series is not certified for using in Automotive application and no PPAP. However, in the case of some automotive accessories and specific applications for 2 and 3 wheeled vehicles the PTS is widely used and very suitable. Please contact your local C&K representative to discuss your application and the best switch solution. Soldering Style Height Packaging THT SMT SMT SMT SMT SMT SMT SMT All heights 4.3 mm 4.3 mm with pegs 7.3 mm 7.3 mm with pegs 8.5 mm 8.5 mm with pegs 12 mm Plastic bag tape & reel tape & reel tape & reel tape & reel tape & reel tape & reel tape & reel Parts per Packaging 500 900 600 500 500 500 400 250 How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and and place it in the appropriate box. STANDARD VERSION: 200K LIFE P T S 1 2 5 S 2 L F S Style S Straight, top actuated Actuator Shape NONE Round J Snap fit 73 height only Actuator Force M 180 grams K 250 grams RoHS, silver plated Termination & Packaging NONE THT in bags SMTR SMT in tape & reel Pegs Option NONE no pegs P with pegs - only for SMT version in round and square snap fit actuator (not for 12 switch height) Switch Height 43 4.3 mm round actuator 73 7.3 mm sqaure snap fit actuator 85 8.5 mm round actuator 12 12.0 mm round actuator with ribs Other heights with the round actuator are available upon request. Different minimum order quantities than the stand may apply. Dimensions are shown: mm Specifications and dimensions subject to change 14 Nov 22 B–156 www.ckswitches.com PTS125 Series 12 mm Tact Switches NEW LONG LIFE VERSION: 1000K TO 5000K LIFE P T S 1 2 5 S 2 L F Style S Straight, top actuated S RoHS, silver plated Life Cycles 1M 1M life cycles 5M 5M life cycles * B * 5M life only for 130 gf version Termination & Packaging NONE THT in bags SMTR SMT in tape & reel Actuator Force L 130 grams M 180 grams K 250 grams R 350 grams Switch Height 43 4.3 mm round actuator 73 7.3 mm sqaure snap fit actuator 85 8.5 mm round actuator 12 12.0 mm round actuator with ribs Pegs Option NONE no pegs P with pegs Ground Pin Option NONE no ground pin G with ground pin * * Ground pin version design is available for SMT only Other heights with the round actuator are available upon request. Different minimum order quantities than the stand may apply. THT VERSION WITH PEGS WITH ROUND ACTUATOR THT VERSION WITHOUT PEGS WITH ROUND ACTUATOR H= 4.3, 7.3 & 8.5 MM (other height upon request) H= 4.3, 7.3 & 8.5 MM (other height upon request) 3,3 H Ø7 1 3,7 0,3 1 12,5 2 5 4 3 SCHEMATIC 4 12,5 ± 0,05 H 3 4 holes Ø 1,3 5 ± 0,05 2 12 1 SCHEMATIC 12 5 RECOMMENDED PCB LAYOUT Recommended P.C.B layout Dimensions are shown: mm Specifications and dimensions subject to change 14 Nov 22 B–157 www.ckswitches.com Tactile Switches Actuator Shape NONE Round J Snap fit 73 height only PTS125 Series 12 mm Tact Switches NEW SMT VERSION WITH PEGS WITH ROUND ACTUATOR AND PEGS H= 4.3, 7.3 & 8.5 MM (other height upon request) H +0,05 0,05 0 1,5 1 1 2x Ø1,5` 0,1 15,3 ± 0,2 2 5 9 ± 0,15 4 3 2 3 4 5 ± 0,05 1 1,5 2 9 ± 0,05 SCHEMATIC 14,3 ± 0,05 12 2x Ø 2 12 RECOMMENDED PCB LAYOUT SMT VERSION WITHOUT PEGS WITH ROUND ACTUATOR AND PEGS H= 4.3, 7.3 & 8.5 MM (other height upon request) H Tactile Switches B 0,3 3,3 Ø7 SCHEMATIC Recommended P.C.B layout Dimensions are shown: mm Specifications and dimensions subject to change 14 Nov 22 B–158 www.ckswitches.com PTS125 Series 12 mm Tact Switches NEW THT VERSION WITHOUT PEGS WITH SQUARE SNAP FIT ACTUATOR 3,3 ± 0,15 H= 7.3 MM H= 7.3 MM B 3,7 2 Ø7 3,8 3 2,1 3,8 3 THT VERSION WITHOUT PEGS WITH SQUARE SNAP FIT ACTUATOR 3,3 +0,15 7,3 0 0,3 2 3 4 Ø2 1 2 3 4 SCHEMATIC 12 1 5 SCHEMATIC 12 5 ± 0,05 5 12,5 ± 0,05 4 holes Ø 1,3 Tactile Switches 1 12,5 Recommended P.C.B layout RECOMMENDED PCB LAYOUT SMT VERSION WITH PEGS WITH SQUARE SNAP FIT ACTUATOR AND PEGS H= 7.3 MM 3,3 ± 0,15 3,3 1,5 1 1 5 9 ± 0,15 1 2 3 4 12 2 SCHEMATIC SCHEMATIC 4 Ø2 14,3 ± 0,05 2x Ø 2 1,5 5 ± 0,05 12 9 ± 0,05 3 H= 7.3 MM 3,8 3 +0,05 0,05 0 0,3 Ø 1,5 15,3 ± 0,2 +0,15 0 2 2,1 Ø7 3,8 3 SMT VERSION WITHOUT PEGS WITH SQUARE SNAP FIT ACTUATOR AND PEGS 7,3 Recommended P.C.B layout 2 RECOMMENDED PCB LAYOUT Dimensions Dimensions are shown: mm are shown: mm Specifications Specifications and and dimensions dimensions subject subject to change to change 14 Nov 22 B–159 www.ckswitches.com www.ckswitches.com PTS125 Series 12 mm Tact Switches NEW THT VERSION WITH ROUND RIBBED ACTUATOR H= 12.0 MM Ø7 Ø6 3,3 1 2 3,7 Tactile Switches 0,3 1 12,5 5 4 3 3 4 12,5 ± 0,05 4 holes Ø 1,3 5 ± 0,05 2 12 1 Ø 1,8 1,15± 0,1 SCHEMATIC 12 RECOMMENDED PCB LAYOUT H= 12.0 MM Ø7 Ø6 6,2 Ø4 1 5 SCHEMATIC 3 4 14,3 ± 0,05 5 ± 0,05 2 4 3 1,5 1 Ø 1,8 2 1 1,15± 0,1 12 15,3 ± 0,2 +0,05 3,3 0,05 0 12 7,5 0,3 SMT VERSION WITH ROUND RIBBED ACTUATOR 0,3 B 12 7,5 6,2 0,3 Ø4 2 12 RECOMMENDED PCB LAYOUT Dimensions are shown: mm Specifications and dimensions subject to change 14 Nov 22 B–160 www.ckswitches.com